Aluminum Extrusion Parts

Raw extrusion lengths are a commodity; finished extrusion parts are a product. This page covers the second: profiles that arrive cut to length, drilled, machined and anodized where specified — ready for your assembly. The families are the range's own: custom profiles made according to your design, extruded aluminum pipe, extrusions for doors and windows, and the heatsink and enclosure families covered on their own pages.

The difference between buying lengths and buying parts is who carries the operations and the scrap. A finished-part programme puts cutting yield, hole accuracy and finish quality on the supplier's process plan — and on its inspection record — instead of on your workshop.

Custom profiles to design are the open door of the range: any constant cross-section your product needs, extruded in 6061/6063. Extruded pipe serves round and tubular requirements. Door and window extrusions represent the architectural end — long, finish-critical profiles where surface quality is the specification. Heatsinks and enclosures, detailed on their own pages, are the equipment end. Across all of them, the secondary operations are the factory's own machining and finishing lines.

If your part mixes an extrusion with cast, stamped or plastic companions — a profile frame with cast corners, a heatsink with a stamped cover — the set can be quoted together. Mixed-process assemblies are this factory's native format.

Send the section drawing, cut lengths, hole and machining requirements, finish and quantities. For architectural profiles, state the visible faces and finish expectations explicitly — surface is the product on those parts. Trial lengths are supported under the no-fixed-MOQ policy, so a new profile can be proven before a production commitment.

Extrusion programmes stay healthy on two habits. First, treat the section as a contract: once the profile die is proven, changes to the section are tooling events, so the time to argue about a fin, a wall or a channel is at section review, with the die designer in the conversation. Second, plan lengths and downstream machining as one schedule — cut lengths, hole patterns and anodizing batches interact, and programmes that schedule them together waste less metal and less time than programmes that order each step in isolation.

Buyers transferring an existing profile should say so at enquiry. A profile with an existing die, a profile needing a new die, and a profile being re-specified from a sample length are three different projects with three different first steps, and the review will name which one you have before quoting anything.